-
SUP-P300 Common Rail Pressure Transmitter
The fuel rail pressure sensor is a small but critical component of an automotive fuel system. It measures the pressure in the fuel system and facilitates the detection of leaks, especially those generated by gasoline evaporation.
-
SUP-LDG Remote type electromagnetic flowmeter
Electromagnetic flowmeter is only applicable to measure the flow of conductive liquid, which is wide used in water supply, sewage water measuring, industry chemical measuring etc. The remote type is with high IP protection class and can be installed in different locations for the transmitter and converter. Output signal can pulse,4-20mA or with RS485 communication.
Features
- Accuracy:±0.5%(Flow speed > 1m/s)
- Reliably:0.15%
- Electric conductivity: Water: Min. 20μS/cm
Other liquid:Min.5μS/cm
- Flange:ANSI/JIS/DIN DN15…1000
- Ingress protection:IP68
-
SUP-LDG Carbon steel body electromagnetic flow meter
SUP-LDG electromagnetic flow meter is applicable for all conductive liquids. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. Can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions. Features
- Pipe diameter: DN15~DN1000
- Accuracy: ±0.5%(Flow speed > 1m/s)
- Reliability:0.15%
- Electric conductivity: Water: Min. 20μS/cm; Other liquid:Min.5μS/cm
- Turndown ratio: 1:100
- Power supply:100-240VAC，50/60Hz; 22-26VDC
-
SUP-LDG Stainless steel body electromagnetic flowmeter
Magnetic flowmeters operate under the principle of Faraday’s Law of Electromagnetic Induction to measure liquid velocity. Following Faraday’s Law, magnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. In order of usage, magnetic flowmeter use in water/wastewater industry, chemical, food and beverage, power, pulp and paper, metals and mining, and pharmaceutical application. Features
- Accuracy:±0.5%，±2mm/s(flowrate<1m/s)
- Electric conductivity: Water: Min. 20μS/cm
Other liquid:Min.5μS/cm
- Flange:ANSI/JIS/DIN DN10…600
- Ingress protection:IP65
-
SUP-LDG Sanitary electromagnetic flowmeter for food processing
SUP-LDG Sanitary electromagnetic flowmeter is made of stainless steel, which is widely used in water supply, waterworks, food processing, etc. It supports pulse, 4-20mA or RS485 communication signal output.
Features
- Accuracy:±0.5%(Flow speed > 1m/s)
- Reliably:0.15%
- Electric conductivity: Water: Min. 20μS/cm
Other liquid:Min.5μS/cm
- Flange:ANSI/JIS/DIN DN15…1000
- Ingress protection:IP65
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-LDGR Electromagnetic BTU meter
Sino-analyzer electromagnetic BTU meters provide precise thermal energy measurement, accurately calculating the energy needed to raise the temperature of one pound of water by one degree Fahrenheit at sea level, which is a cornerstone metric for evaluating heating and cooling efficiency in commercial and residential settings.
These sophisticated BTU meters are extensively employed in commercial, industrial, and office buildings, delivering optimal performance for chilled water systems, HVAC solutions, and advanced heating applications with exceptional reliability and precision.
Features:
- Electric conductivity: >50μS/cm
- Flange: DN15…1000
- Ingress protection: IP65/ IP68
-
SUP-LUGB Vortex flowmeter wafer installation
SUP-LUGB Vortex flowmeter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. Features
- Pipe diameter:DN10-DN500
- Accuracy: 1.0% 1.5%
- Range Ratio: 1:8
- Ingress protection: IP65
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PH6.3 pH ORP meter
SUP-PH6.3 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance:≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output:4-20mA,RS485, Modbus-RTU,Relay
-
SUP-PH6.0 pH ORP meter
SUP-PH6.0 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output: 4-20mA,RS485, Modbus-RTU,Relay
-
SUP-PSS200 Suspended solids/ TSS/ MLSS meter
SUP-PTU200 Suspended Solids Meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of suspended solids and sludge concentration. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of cuspended colids and cludge concentration value. According to the usage environment, self-cleaning function can be equipped with. Features Range: 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/LResolution:Less than ± 5% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60Hz
-
SUP-PTU200 Turbidity meter
SUP-PTU200 turbidity meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of turbidity. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of turbidity value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple. Features Range: 0.01-100 NTU 、0.01－4000 NTUResolution:Less than ± 2% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60Hz
-
SUP-PTU8011 Low turbidity sensor
SUP-PTU-8011 widely used in such fields as sewage plants, Drinking water plants, water stations, surface water, and industries for inspecting the turbidity. Features Range: 0.01-100NTUResolution:The deviation of reading in 0.001~40NTU is ±2% or ±0.015NTU, choose the bigger one; and it is ±5% in the range of 40-100NTUFlow Rate: 300ml/min≤X≤700ml/minPipe Fitting: Injection Port: 1/4NPT; Discharge Outlet: 1/2NPT
-
SUP-PSS100 Suspended solids/ TSS/ MLSS meter
SUP-PSS100 Suspended solids meter based on the infrared absorption scattered light method used to measure liquid suspended solids and sludge concentration. Features Range: 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/LResolution:Less than ± 5% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60HzHotline: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PTU100 Turbidity meter
SUP-PTU 100 turbidity meter based on the infrared absorption scattered light method guarantee the continuous and accurate detection of turbidity. Features Range: 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/LResolution:Less than ± 5% of the measured valuePressure range: ≤0.4MPaPower supply: AC220V±10%; 50Hz/60Hz
-
SUP-LWGY Turbine flowmeter thread connection
SUP-LWGY series liquid turbine flowmeter is a kind of speed instrument, which has the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance. It is used to measure the volume flow of low viscosity liquid in closed pipe. Threaded type, simple to install and maintain, usually used for small diameter flow measurements: Male:DN4~DN100; female:DN15~DN50 Features
- Pipe diameter:DN4~DN100
- Accuracy: 0.2% 0.5% 1.0%
- Power supply: 3.6V lithium battery; 12VDC; 24VDC
- Ingress protection: IP65
-
SUP-LWGY Turbine flowmeter flange connection
SUP-LWGY series liquid turbine flowmeter is a kind of speed instrument, which has the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance. It is used to measure the volume flow of low viscosity liquid in closed pipe. In the petroleum, chemical, metallurgy, water supply, paper and other industries with a wide range of applications. Features
- Pipe diameter:DN4~DN200
- Accuracy: 0.5%R, 1.0%R
- Power supply: 3.6V lithium battery; 12VDC; 24VDC
- Ingress protection: IP65
Hotline: +86 15867127446Email : info@Sinomeasure.com
-
SUP-RD901 Radar level meter for corrosive liquid
SUP-RD901 Non-contact radar with simple commissioning, trouble-free operation saves time and money. PTFE sensor material, for usage in a wide range of applications – be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications. Features
- Range:0~10 m
- Accuracy: ±5mm
- Application: Corrosive liquid
- Frequency Range: 26GHz
-
SUP-LUGB Vortex flowmeter with temperature & pressure compensation
SUP-LUGB Vortex flowmeter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity.
Features
- Pipe diameter:DN10-DN500
- Accuracy: 1.0% 1.5%
- Range Ratio: 1:8
- Ingress protection: IP65
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-RD902T 26GHz Radar level meter
SUP-RD902T Non-contact radar with simple commissioning, trouble-free operation saves time and money. PTFE sensor material, for usage in a wide range of applications – be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications.
Features
- Range:0~20 m
- Accuracy: ±3mm
- Application: Liquid
- Frequency Range: 26GHz
-
SUP-LUGB Vortex flowmeter without temperature & pressure compensation
SUP-LUGB Vortex flowmeter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. Features
- Pipe diameter:DN10-DN300
- Accuracy: 1.0% 1.5%
- Range Ratio: 1:8
- Ingress protection: IP65
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-RD902 26GHz Radar level meter
SUP-RD902 Non-contact radar level meter with simple commissioning, trouble-free operation saves time and money. For usage in a wide range of applications – be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications. Features
- Range:0~30 m
- Accuracy: ±3mm
- Application: Liquid
- Frequency Range: 26GHz
-
SUP-RD903 Solid material radar level meter
SUP-RD903 Solid material radar level meter with high frequency, measurement of solid material, strong dust, easy to crystallize, condensation occasion Features
- Range:0~70 m
- Accuracy: ±15mm
- Application: Solid material, strong dust, easy to crystallize, condensation occasion
- Frequency Range: 26GHz
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-RD906 26GHz Tank radar level meter
SUP-RD906 26GHz Tank radar level meter with high frequency, measurement of solid and low dielectric constant of the best choice. Features
-
SUP-RD909 70 meters Radar level meter
SUP-RD909 Radar level meter adopts a recommended industry emission frequency of 26GHz, so it has beam angle is small, concentrated energy, has stronger anti-interference ability and greatly improves the precision and reliability of measurement. The measurement range of up to 70 meters, covering a large reservoir water level measurement. Features
- Range:0~70 m
- Accuracy: ±10mm
- Application: Rivers, Lakes, Shoal
- Frequency Range: 26GHz
-
SUP-RD908 Radar level meter for river
SUP-RD908 Radar level meter with top-down installation of a Micropilot sensor offers perfect application fit in all industries. Non-contact radar with simple commissioning, trouble-free operation saves time and money. For usage in a wide range of applications – be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications. Features
- Range:0~30 m
- Accuracy: ±3mm
- Application: Rivers, Lakes, Shoal
- Frequency Range: 26GHz
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-RD905 Solid material radar level meter
SUP-RD905 Radar level meter with high frequency, measurement of Solid particles, powder constant of the best choice. Features
- Range:0~30 m
- Accuracy: ±10mm
- Application:Solid particles, powder
- Frequency Range: 26GHz
-
SUP-DM3000 Electrochemical dissolved oxygen meter
SUP-DM3000 Membrane type dissolved oxygen is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. The meter uses a liquid crystal display for measuring and displaying DO and medium temperature values, with analog and digital signal outputs and control functions. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60Hz
-
SUP-DY3000 Optical dissolved oxygen meter
SUP-DY3000 Optical type dissolved oxygen online analyzer, an intelligent online chemical analyzer. The cap of the sensor is coated with a luminescent material. Blue light from an LED illuminates the luminescent chemical. The luminescent chemical instantly becomes excited and releases red light. The time and intensity of red light are inversely proportional to the concentration of oxygen molecules, So the concentration of oxygen molecules is calculated. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60Hz
-
SUP-TDS210-B Conductivity meter
SUP-TDS210-B Conductivity/Hardness/Resistivity Online analyzer, an intelligent Online chemical analyzer, is widely applied for continuous monitoring and measurement of EC value or TDS value or ER value and temperature in the solution in the industry of thermal power, chemical fertilizer, environmental protection, metallurgy, pharmacy, biochemistry, food and water, etc. Features Range:0.01 electrode: 0.02～20.00us/cm
0.1 electrode: 0.2～200.0us/cm
1.0 electrode: 2～2000us/cm
10.0 electrode: 0.02～20ms/cmResolution:±2%FSOutput signal: 4~20mA; Relay; RS485Power supply:AC220V±10%, 50Hz/60HzHotline: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com -
SUP-DM2800 Membrane dissolved oxygen meter
SUP-DM2800 Membrane type dissolved oxygen is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. The meter uses a liquid crystal display for measuring and displaying DO and medium temperature values, with analog and digital signal outputs and control functions. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60HzHotline: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-EC8.0 conductivity meter
SUP-EC8.0 conductivity meter is an intelligent online chemical analyzer, is widely applied for continuous monitoring and measurement of EC value or TDS value or ER value and temperature in the solution in the industry of thermal power, chemical fertilizer, environmental protection, metallurgy, pharmacy, biochemistry, food and water, etc. Features Range:0.01 electrode: 0.00uS/cm～2000mS/cmResolution:±1%FSOutput signal: 4~20mA; Relay; RS485Power supply:90 to 260 VAC
-
SUP-TDS210-C Conductivity meter
SUP-TDS210-C Conductivity meter EC controller, an intelligent Online chemical analyzer, is widely applied for continuous monitoring and measurement of EC value or TDS value or ER value and temperature in the solution in the industry of thermal power, chemical fertilizer. Features Range:0.01 electrode: 0.02～20.00us/cm
0.1 electrode: 0.2～200.0us/cm
1.0 electrode: 2～2000us/cm
10.0 electrode: 0.02～20ms/cmResolution:±2%FSOutput signal: 4~20mA; Relay; RS485Power supply:AC220V±10%, 50Hz/60Hz -
SUP-MP-A Ultrasonic level transmitter
SUP-MP-A ultrasonic level transmitter is an all-in-one liquid and solid level measurement device featuring digitized and customizable designs and components. It has won numerous compliments for the precise level measurement and data reading, transmission, and man-machine interaction.
Features Measure range: 0 ~ 30m;
Blind zone:0.35m;
Accuracy: 0.5%F.S;
Power supply: (14~28) VDC.
-
SUP-PH8.0 pH ORP meter
SUP-PH8.0 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output: 4-20mA,RS485, Modbus-RTU,Relay
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PH160S pH ORP meter
SUP-PH160S industrial pH meter is an online pH analyzer with 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance:≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output:4-20mA,RS485, Modbus-RTU,Relay
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-DFG Ultrasonic Level Transmitter, Non-Contact Level Measurement
An ultrasonic level meter is an advanced, microprocessor-driven device designed for accurate and reliable level measurement. This innovative tool uses ultrasonic pulses emitted by a sensor (transducer) to measure distances. The pulses reflect off the surface of the measured liquid or material and are then captured by the same sensor or a dedicated ultrasonic receiver.
Using a piezoelectric crystal or magnetostrictive technology, these reflected sound waves are converted into electrical signals. By calculating the time it takes for the sound waves to travel from the sensor to the surface and back, the device determines the precise distance to the measured material.
What sets ultrasonic level meters apart is their non-contact measurement capability, making them incredibly versatile. They can accurately measure the height of various liquids and solids, with virtually no limitations on the type of material. Whether monitoring water, chemicals, or bulk solids, this cutting-edge technology delivers consistent, high-performance results for a wide range of industrial and commercial applications.
Features:
- Measure range:0 ~ 50m
- Blind zone:＜0.3-2.5m（different for range）
- Accuracy:1%F.S
- Power supply:220V AC+15% 50Hz (Optional: 24VDC )
Tel.: +86 13357193976 (WhatsApp)
Email: info@Sinomeasure.com
-
SUP-ZMP Ultrasonic Level Transmitter
SUP-ZMP Ultrasonic level transmitter is microprocessor controlled digital level meter. During the level measuring, the sensor or transducer generates the ultrasonic pulse, which creates the surface acoustic wave after the liquid reflection. This sensor or the ultrasonic receiver, utilizing the piezoelectric crystal or a magnetostrictive device, converts the emitted and received sound waves into an electrical signal, then calculates the time between the sensor surface to the distance measured liquid.
Features：
- Measure range:0 ~ 1m; 0 ~ 2m
- Blind zone:＜0.06-0.15m（changes due to the measured range）
- Accuracy:0.5%F.S
- Power supply: 12-24VDC
-
SUP-ZP Ultrasonic Level Transmitter
SUP-ZP Ultrasonic level transmitter, taking the advantages of many level measuring instruments, is a universal one characterized by a totally digitalized and humanized design. It has perfect level monitoring, data transmission, and man-machine communication. The master chip is an imported technical single chip with relevant application-specific ICs, such as digital temperature compensation. It is featured by strong anti-interference performance; free setting of upper and lower limits and online output regulation, and on-site indication.
Features：
- Measure range:0 ~ 15m
- Blind zone:＜0.4-0.6m（different for range）
- Accuracy:0.3%F.S
- Power supply: 12-24VDC
-
SUP-DP Ultrasonic level transmitter
Ultrasonic level transmitter is microprocessor controlled digital level meter. Ultrasonic pulses generated by the sensor (transducer) emitted in the measurement, the surface acoustic wave after reflection by the liquid receiving same sensor or an ultrasonic receiver, by a piezoelectric crystal or a magnetostrictive device into an electrical signal by transmitting and receiving sound waves to calculate the time between the sensor surface to the distance measured liquid. As a result of non-contact measurement, measured media is almost unlimited, can be used to measure the height of a variety of liquid and solid materials. Features Measure range:0 ~ 50mBlind zone:＜0.3-2.5m（different for range）Accuracy:1%F.SPower supply: 24VDC (Optional: 220V AC+15% 50Hz)
-
SUP-1158S Wall mounted ultrasonic flowmeter
SUP-1158S Wall mounted clamp on ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance. Features
- Pipe diameter:DN32-DN6000
- Accuracy: ±1%
- Power supply: 10～36VDC/1A
- Output: 4～20mA, relay, RS485
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-2000H Handheld ultrasonic flowmeter
SUP-2000H ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance Features
- Pipe diameter:DN32-DN6000
- Accuracy:1.0%
- Power supply: 3 AAA built-in Ni-H batteries
- Case material: ABS
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-LZ Metal tube rotameter
SUP-LZ Metal Tube Rotameter is a device that measures the volumetric flow rate of fluid in a closed tube. It belongs to a class of meters called variable-area flowmeters, which measure flow rate by allowing the cross-sectional area the fluid travels through to vary, causing a measurable effect. Features Inpress protection: IP65
Range ratio: Standard: 10:1
Pressure: Standard: DN15~DN50≤4.0MPa, DN80~DN400≤1.6MPa
Connection: Flange, Clamp, ThreadHotline: +86 15867127446Email : info@Sinomeasure.com -
SUP-1158-J Wall mounted ultrasonic flowmeter
SUP-1158-J ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance. Features
- Pipe diameter:DN25-DN600
- Accuracy: ±1%
- Power supply: 10～36VDC/1A
- Output: 4～20mA, RS485
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-LWGY Turbine flow sensor thread connection
SUP-LWGY series liquid turbine flow sensor is a kind of speed instrument, which has the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance. It is used to measure the volume flow of low viscosity liquid in closed pipe. Features
- Pipe diameter:DN4~DN100
- Accuracy: 0.2% 0.5% 1.0%
- Power supply: 3.6V lithium battery; 12VDC; 24VDC
- Ingress protection: IP65
-
SUP-2100 Single-loop digital display controller
Single-loop digital display controller with automatic SMD packaging technology, has a strong anti-jamming capability. Designed with dual-screen LED display, it could display more contents. It can be used in conjunction with various sensors、transmitters to display temperature, pressure, liquid level, speed, force and other physical parameters, and to output alarm control, analog transmission, RS-485/232 communication etc. Features Double four-digit LED display;10 types of dimensions available;Standard snap-in installation;Power supply: AC/DC100~240V (Frequency 50/60Hz) Power consumption≤5W DC 12~36V Power consumption≤3W
-
SUP-2200 Dual-loop digital display controller
Dual-loop digital display controller with automatic SMD packaging technology has a strong anti-jamming capability. It can be used in conjunction with various sensors、transmitters to display temperature, pressure, liquid level, speed, force and other physical parameters, and to output alarm control, analog transmission, RS-485/232 communication etc. Features Double four-digit LED display;10 types of dimensions available;Standard snap-in installation;Power supply: AC/DC100~240V (Frequency 50/60Hz) Power consumption≤5W DC 12~36V Power consumption≤3W
-
SUP-2300 Artificial Intelligence PID Regulator
Artificial intelligence PID regulator adopts advanced experts PID intelligence algorithm, with high control precision, no overshoot, and fuzzy self-tuning function. The output is designed as modular architecture; you can acquire various control types by replacing different function modules. You can choose PID control output type as any of current, voltage, SSR solid state relay, single / three-phase SCR zero-over triggering and so on. Features Double four-digit LED display;8 types of dimensions available;Standard snap-in installation;Power supply: AC/DC100~240V (Frequency 50/60Hz) Power consumption≤5WDC 12~36V Power consumption≤3W
-
SUP-2600 LCD Flow (Heat) Totalizer / Recorder
LCD flow totalizer is mainly designed for trading discipline between supplier and customer in regional central heating, and calculating steam, and high precision flow measurement. It’s a full-functional secondary instrument based on 32-bit ARM micro-processor, high-speed AD and large-capacity storage. The instrument has fully adopted surface-mount technology. Features Double four-digit LED display;5 types of dimensions available;Standard snap-in installation;Power supply: AC/DC100~240V (Frequency 50/60Hz)Power consumption≤5W DC 12~36V Power consumption≤3W
-
SUP-2700 Multi-loop digital display controller
Multi-loop digital display control instrument with automatic SMD packaging technology, has a strong anti-jamming capability. It can be used in conjunction with various sensors、transmitters to display temperature, pressure, liquid level, speed, force and other physical parameters, and it can measure 8~16 loops input go the rounds, support 8~16 loops “uniform alarm output”, “16 loops separate alarm output”, “uniform transition output ”, “8 loops separate transition output” and 485/232 communication, and is applicable in system with various measuring points. Features Double four-digit LED display;3 types of dimensions available;Standard snap-in installation;Power supply: AC/DC100~240V (Frequency 50/60Hz)Power consumption≤5W DC 20~29V Power consumption≤3W
-
pH installation accessories
pH installation box, ph installation bracket and ph signal amplifier for pH sensor and controller installation. Features
-
SUP-130T Economic 3-digit Display Fuzzy PID Temperature Controller
The instrument displays with dual row 3-digit numeric tube, with a variety of RTD/TC input signal types optional with an accuracy of 0.3%; 5 sizes optional, supporting 2-way alarm functions, with analogue control output or switch control output function, under accurate control without overshoot. Features Double four-digit LED display;5 types of dimensions available;Standard snap-in installation;Power supply: AC/DC100~240V (AC/50-60Hz) Power consumption≤5W; DC 12~36V Power consumption≤3W
-
SUP-DY2900 Optical dissolved oxygen meter
SUP-DY2900 Optical type Dissolved oxygen online analyzer, an intelligent online chemical analyzer. The cap of the sensor is coated with a luminescent material. Blue light from an LED illuminates the luminescent chemical. The luminescent chemical instantly becomes excited and releases red light. The time and intensity of red light are inversely proportional to the concentration of oxygen molecules, So the concentration of oxygen molecules is calculated. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60Hz
-
SUP-1300 Easy Fuzzy PID Regulator
SUP-1300 series easy fuzzy PID regulator adopts fuzzy PID formula for easy operation with measurement precision of 0.3%; 7 types of dimensions available, 33 types of signal input available; applicable to measurement of industrial process quantifiers including temperature, pressure, flow, liquid level, and humidity etc. Features Double four-digit LED display;7 types of dimensions available;Standard snap-in installation;Power supply:AC/DC100~240V (Frequency 50/60Hz) Power consumption≤5W; DC12~36V Power consumption≤3W
-
Sinomeasure Multi-parameter analyzer
The multi-parameter analyzer is a versatile, high-performance solution, expertly designed for use in urban and rural water supply facilities, tap water distribution networks, secondary water supply systems, household taps, indoor swimming pools, and real-time water quality monitoring in large-scale purification units and direct drinking water systems. This essential online analytical tool plays a critical role in enhancing water plant production process control, optimizing water resource management, and ensuring stringent sanitation oversight, delivering reliable insights for a sustainable water treatment.
Features:
- PH /ORP:0-14pH, ±2000mV
- Turbidity:0-1NTU / 0-20NTU / 0-100NTU / 0-4000NTU
- Conductivity:1-2000uS/cm / 1~200mS/m
- Dissolved oxygen:0-20mg/L
-
SUP-PTU300 Turbidity meter
○Laser light source, with ultra-high noise ratio, high monitoring accuracy○Small size, easy system integration water consumption is small, saving daily operation cost○It can be applied to the turbidity measurement of drinking water after membrane-type clean water○Automatic discharge, long time maintenance-free operation, save daily operation and maintenance costs○Optional Internet of things module support cloud platform and mobile phone data remote monitoring. Features Range:0-20 NTU (31),0-1 NTU (30)Power supply:DC 24V (19-30V)Measurement:90° scatteringOutput: 4-20mA, RS485
-
SUP-PX261 Submersible level meter
SUP-PX261 series water level meter are completely sealed for submersion in liquid, can be used to measure water level, well depth, groundwater leverl and so on, common accracy is 0.5%FS,with voltage or 4-20mA output signals Features Range:0 ~ 100mResolution:0.5% F.SOutput signal: 4~20mA; 0~10V; 0~5VPower supply:24VDC; 12VDCTel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-P260G High temp type submersible level meter
SUP-P260G series water level meter are completely sealed for submersion in liquid, can be used to measure water level, well depth, groundwater leverl and so on, common accracy is 0.5%FS,with voltage or 4-20mA output signals Features Range:0 ~ 10mResolution:0.5% F.SMedium temp.: -40℃～200℃Output signal: 4~20mAPower supply:24VDCTel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
Standard pH calibration solutions
Sinomeasure standard pH calibration solutions have an accuracy of +/- 0.01 pH at 25°C (77°F). Sinomeasure can provide the most popular and commonly used buffers (4.00, 7.00, 10.00 and 4.00, 6.86, 9.18) and which are dyed different colors so they can be easily identified when you are busy working. Features Accuracy: +/- 0.01 pH at 25°C (77°F)Solution value: 4.00, 7.00, 10.00 and 4.00, 6.86, 9.18Volume: 50ml * 3
-
SUP-P260 Submersible level meter
SUP-P260 series submersible level meter are completely sealed for submersion in liquid, can be used to measure water level, well depth, groundwater leverl and so on type, common accuracy is 0.5%FS,with voltage or 4-20mA output signals Features Range:0~0.5m…200mAccuracy:0.5% F.SOutput signal: 4~20mA; 0~10V; 0~5VPower supply:24VDC; 12VDCTel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-LDG-C Electromagnetic flow meter
High accuracy magnetic flowmeter. Special flow meter for chemical and pharmaceutical industry. The latest models in 2021 Features
- Pipe diameter: DN15~DN1000
- Accuracy: ±0.5%(Flow speed > 1m/s)
- Reliably:0.15%
- Electric conductivity: Water: Min. 20μS/cm; Other liquid:Min.5μS/cm
- Turndown ratio: 1:100
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-DO7013 Electrochemical dissolved oxygen sensor
SUP-DO7013 Electrochemical dissolved oxygen sensor is widely used in Aquaculture, water quality testing, informational data collection, IoT water quality testing etc. Features Range: 0-20mg/LResolution:0.01mg/LOutput signal: RS485Communication protocol: MODBUS-RTU
-
SUP-P260-M5 Submersible level meter
SUP-P260-M5 Submersible level meter are completely sealed for submersion in liquid, can be used to measure water level, well depth, groundwater leverl and so on, common accuracy is 0.5%FS,with voltage or 4-20mA output signalsused. Durable 316 SS construction for reliable, long life in harsh environments. Features Range:0 ~ 5mResolution:0.5% F.SOutput signal: 4~20mAPower supply:24VDC
-
SUP-P260-M3 Submersible level meter
SUP-P260-M3 Submersible level meter are completely sealed for submersion in liquid, can be used to measure water level, well depth, groundwater leverl and so on, common accuracy is 0.5%FS Features Range:0 ~ 5mResolution:0.5% F.SOutput signal: 4~20mAPower supply:24VDC
-
SUP-P260-M4 Submersible level and temperature meter
SUP-P260-M4 Submersible level and temperature meter are completely sealed for submersion in liquid, for continuous level and temperature measurement in water level, well depth, groundwater level and so on. Features Range:Level: (0…100)m Temperature: (0…50)℃Accuracy:Temperature :1.5%FS Level:0.5%FSOutput signal: RS485/4~20mA/0~5V/1~5VPower supply: 12…30VDC
-
SUP-2051LT Flange mounted differential pressure transmitters
SUP-2051LT Flange-mounted differential pressure transmitter measures the height of the tank body, according to the principle that the pressure generated by the liquid of different specific gravity at different heights has a linear relationship Features Range: 0-6kPa~3MPaResolution:0.075%Output: 4-20mA analog output Power supply: 24VDC
-
SUP-110T Economic 3-digit Single-loop Digital Display Controller
Economic 3-digit Single-loop Digital Display Controller is in modular structure, easily operable, cost-effective, applicable in light industry machinery, ovens, laboratory equipment, heating/cooling and other objects in the temperature range of 0~999 °C. Features Double four-digit LED display;5 types of dimensions available;Standard snap-in installation;Power supply: AC/DC100~240V (Frequency50/60Hz) Power consumption≤5W; DC 12~36V Power consumption≤3W
-
Magnetic flow transmitter
Electromagnetic flow transmitter adopts LCD indicator and “simple setting” parameters to improve the convenience of maintenance. The flow sensor diameter, lining material, electrode material, flow coefficient can be revised, and the intelligent diagnosis function significantly improves the applicability of the flow transmitter.And Sinomeasure electromagnetic flow transmitter supports customized appearance color and surface stickers. Features Graphic display:128 * 64Output:Current (4-20 mA), pulse frequency, mode switch valueSerial communication: RS485
-
SUP-825-J Signal Calibrator 0.075% high accuracy
0.075% Accuracy signal generator has a multiple signal Output and measurement including voltage, current and thermoelectric couple with LCD screen and silicone keypad, simple operation, longer standby time, higher accuracy and programmable output. It’s widely used in LAB Industrial field, PLC Process Instrument, Electric value and other area’s debugging. Features DC Voltageand resistance signal measurementsourceVibration: Random, 2g, 5 to 500HzPower requirement:4 AA Ni-MH, Ni-Cd batteriesSize:215mm×109mm×44.5mmWeight:About 500g
-
SUP-C702S Signal generator
SUP-C702S Signal generator has a multiple signal Output and measurement including voltage, current and thermoelectric couple with LCD screen and silicone keypad, simple operation, longer standby time, higher accuracy and programmable output. It’s widely used in LAB Industrial field, PLC Process Instrument, Electric value and other area’s debugging. We guarantee this product has English button, English operation interface, English instructions. Features ·Keypad to enter output parameters directly·Concurrent input / output, convenient to operate·Sub display of sources and reads (mA, mV, V)·Large 2-line LCD with backlight display
-
SUP-C703S Signal generator
SUP-C703S Signal generator has a multiple signal Output and measurement including voltage, current and thermoelectric couple with LCD screen and silicone keypad, simple operation, longer standby time, higher accuracy and programmable output. It’s widely used in LAB Industrial field, PLC Process Instrument, Electric value and other area’s debugging. Features · Sources and reads mA, mV, V,Ω, RTD and TC·4*AAA batteries power supply·Thermocouple measurement / output with automatic or manual cold junction compensation·Corresponds to various types of source pattern (Step sweep / Linear sweep / Manual step)
-
SUP-WRNK Thermocouples sensors with mineral insulated
SUP-WRNK thermocouples sensors is mineral insulated construction which results in thermocouples wires that are surrounded by a compacted mineral insulation (MgO) and contained in a sheath such as stainless steel or heat resisting steel. On the basis of this mineral insulated construction, a wide variety of otherwise difficult applications are possible. Features Sensor: B,E,J,K,N,R,S,TTemp.: -200℃ to +1850℃Output: 4-20mA / Thermocouple (TC)Supply:DC12-40V
-
SUP-ST500 Temperature transmitter programmable
SUP-ST500 Head Mounted Smart Temperature transmitter can be used with multiple sensor type [Resistance Thermometer(RTD),Thermocouple (TC)] inputs, is simple to install with improved measurement accuracy over wire-direct solutions. Features Input signal: Resistance temperature detector (RTD), thermocouple (TC), and linear resistance.Output:4-20mAPower supply: DC12-40VResponse time:Reach to 90% of the final value for 1s
-
SUP-WZPK RTD Temperature sensors with mineral insulated resistance thermometers
SUP-WZPK RTD sensors is a mineral insulated resistance thermometers.Generally, electrical resistance of metal varies, depending on the temperature. Platinum in particular is more linear and has a larger temperature coefficient than most other metals. It is therefore, most suitable for temperature measurements. Platinum has excellent properties chemically and physically. Industrial high purity elements are readily obtained for long term use as a resistance element for temperature measurements. The characteristics are specified in JIS and other foreign standards; thus, it permits a highly accurate temperature measurement. Features Sensor: Pt100 or Pt1000 or Cu50 etcTemp.: -200℃ to +850℃Output: 4-20mA / RTDSupply:DC12-40V
-
SUP-603S Temperature signal isolator
SUP-603S Intelligent Temperature Transmitter utilized in automated control systems is a kind of instrument for transformation & distribution, isolation, transmission, operation of a variety of industrial signal, it can also be used with all kinds of industrial sensor to retrieve parameters of signals, isolation, transformation and transmission for remote monitoring local data collection. Features Input: Thermocouple: K, E, S, B, J, T, R, N and WRe3-WRe25, WRe5-WRe26, etc.；Thermal resistance: Pt100, Cu50, Cu100, BA1, BA2, etc; Output: 0(4)mA～20mA；0mA～10mA;0(1)V～5V; 0V～10V;Response time: ≤0.5s
-
SUP-1100 LED Display multi panel meter
SUP-1100 is single-circuit digital panel meter with easy operation; double four-digit LED display, supporting input signals like thermocouple, thermal resistance, voltage, current , and transducer input; applicable to measurement of industrial process quantifiers including temperature, pressure, flow, liquid level, and humidity etc. Features Double four-digit LED display;7 types of dimensions available;Standard snap-in installation;Power supply: 100-240V AC or 20-29V DC;Standard MODBUS protocol;
-
SUP-602S Intelligent signal isolator for voltage/current
SUP-602S Signal isolator utilized in automated control systems is a kind of instrument for transformation & distribution, isolation, transmission, operation of a variety of industrial signal, it can also be used with all kinds of industrial sensor to retrieve parameters of signals, isolation, transformation and transmission for remote monitoring local data collection. Features Input / output: 0(4)mA～20mA；0mA～10mA; 0(1) V～5V；0V～10VAccuracy: ±0.1%F∙S（25℃±2℃）Temperature drift: 40ppm/℃Response time: ≤0.5s
-
SUP-R1200 Chart recorder
SUP-R1200 chart recorder is a precision measuring instrument with perfect definition, high precision, and reliable, multi-functions, easy operated by using unique heat-printing record and advanced technology of microprocessor controlling. It can be recorded and printed uninterrupted. Features Inputs channel:Up to 8channels of universal inputPower supply:100-240VAC，47-63Hz,maximum power＜40WOutput: alarm output,RS485 outputChart speed: Free setting range of 10-2000mm/hDimensions:144*144*233mmSize:138mm*138mm
-
SUP-R200D Paperless recorder up to 4 channels unviersal input
SUP-R200D paperless recorder can input signal for all the various needed monitoring records in the industrial site, such as the temperature signal of thermal resistance, and thermocouple, flow signal of the flow meter, pressure signal of the pressure transmitter, etc. Features Inputs channel:Up to 4 channels of universal inputPower supply:176-240VACOutput: alarm output,RS485 outputSampling period: 1sDimensions:160mm*80*110mm
-
SUP-R1000 Chart recorder
SUP-R1000 recorder is a precision measuring instrument with perfect definition, high precision, and reliable, multi-functions, easy operated by using unique heat-printing record and advanced technology of microprocessor controlling. It can be recorded and printed uninterrupted. Features Inputs channel:Up to 8channelsPower supply:24VDC or 220VACOutput: 4-20mA output,RS485 or RS232 outputChart speed: 10mm/h — 1990mm/h
-
SUP-R4000D Paperless recorder
To ensure quality, starting from the core: In order to ensure that each paperless recorder can be long-term stable operation, we carefully selected materials, the use of cortex-M3 chip Security, to avoid accidents: wiring terminals and power wiring are used to protect the back cover to protect the equipment is not damaged due to wiring. Silicone buttons, long life: Silicone buttons to carry out 2 million tests confirmed its long service life. Features Inputs channel:Up to 16 channels of universal inputPower supply:220VACOutput: alarm output,RS485 outputDimensions:144(W)×144(H)×220(D) mm
-
SUP-R8000D Paperless recorder
Inputs channel: Up to 40 channels of universal inputPower supply: 220VAC，50HzDisplay: 10.41 inches TFT displayOutput: alarm output, RS485 outputDimensions: 288 * 288 * 168mm Features
-
SUP-R6000F Paperless recorder
SUP-R6000F Paperless recorder is with outstanding specifications features like high performance and powerful extented functions. With high visibility Color LCD display, it is easy to read data from the meter. Universal input, high speed of sampling speed and arruracy make it reliable for industry or reaserach applicaiton. Features Inputs channel:Up to 36 channels of universal inputPower supply:(176~264)V AC，47~63HzDisplay:7inches TFTdisplayOutput: alarm output,RS485 outputSampling period: 1sDimensions:193 * 162 * 144mm
-
SUP-R6000C Paperless recorder up to 48 channels unviersal input
SUP-R6000C Color paperless recorder with fixed point/program segment adopts the control algorithm of differential in advance. The proportional band P, integral time I and derivative time D are mutually independent of each another without affecting each other when being adjusted. The system overshoot can be controlled with strong anti-jamming capability. Features Inputs channel:Up to 48 channels of universal inputPower supply:AC85～264V，50/60Hz;DC12～36VDisplay:7 inch TFT display screenOutput: alarm output,RS485 outputDimensions:185*154*176mm
-
SUP-R9600 Paperless recorder up to 18 channels unviersal input
SUP-R6000F Paperless recorder is with outstanding specifications features like high performance and powerful extented functions. With high visibility Color LCD display, it is easy to read data from the meter. Universal input, high speed of sampling speed and arruracy make it reliable for industry or reaserach applicaiton Features Inputs channel:Up to 18 channels of universal inputPower supply:(176~264)VAC，47~63HzDisplay:3.5 inches TFTdisplayOutput: alarm output,RS485 outputSampling period: 1sDimensions:96 * 96 * 100mm
-
SUP-Y290 Pressure gauge battery power supply
SUP-Y290 pressure gauge is with battery power supply, high accuracy up 0.5% FS, battery power supply, backlight etc. The pressure unit can be changed wthin Mpa, PSI, Kg.F/cm aquared, bar, Kpa. Widely used in the industry application. Features Range:-0.1~ 0 ~ 60MPaResolution:0.5%Dimensions: 81mm* 131mm* 47mmPower supply:3V Battery powered
-
SUP-2051 Differential Pressure transmitter
SUP-2051 Differential Pressure transmitter Using high-performance single crystal silicon differential pressure technology accurately measures differential pressure, liquid level or flow rate. and transmits a proportional 4-20 mA output signal. 1kPa to 3MPa full detection range. High-performance static pressure test design, static pressure error ± 0.05% / 10MPa Features Range:0 ~ 1KPa ~ 3MPaResolution:0.075%Output: 4-20mA analog output Power supply:24VDC
-
SUP-P350K Hygienic pressure transmitter
SUP-P350K is a piezoresistive pressure sensor with compact design and stainless steel body SS304 and SS316L diaphragm , can work in the non-causticity environment, with 4-20mA signal output. Features Range:-0.1~ 0 ~ 40MPaResolution:0.5% F.SOutput signal: 4~20mAInstallation: ClampPower supply:24VDC (12 ~ 36V)
-
SUP-P450 2088 Membrane pressure transmitter
SUP-P450 is a piezoresistive pressure sensor with compact design and stainless steel body SS304 and SS316L diaphragm , can work in the non-causticity environment, with 4-20mA signal output. Features Range:-0.1~ 0 ~ 40MPaResolution:0.5% F.SOutput signal: 4~20mA; 1~5V; 0~10V; 0~5V; RS485Installation: ClampPower supply:24VDC (9 ~ 36V)
-
SUP-PX400 Pressure transmitter
SUP-PX400 pressure transmitter take use of OEM all-welded pressure core body, miniature amplifier processing circuit. The products are widely used in industrial process control, petroleum, chemical, metallurgy and other industries. Features Range:-0.1~ 0 ~ 60MPaResolution:0.5% F.S; 0.3%F.S optionalOutput signal: 4~20mAInstallation: ThreadPower supply:24VDC (9 ~ 36V)
-
SUP-P3000 Pressure transmitter
SUP-3000 Pressure transmitter uses the unique and proven silicon sensor with state-of-the-art digital processing to provide exceptional performance in terms of accuracy, long term stability and functionalities. -0.1MPa~40MPa full detection range. Features Range:-0.1MPa~40MPaResolution:0.075% F.SOutput signal: 4~20mAInstallation: ThreadPower supply:24VDC (9 ~ 36V)
-
SUP-P300G High temperature pressure transmitter
SUP-P300G is a piezoresistive pressure sensor with compact design and stainless steel body SS304 and SS316L diaphragm , can work in the non-causticity environment, with 4-20mA signal output. Features Range:-0.1~ 0 ~ 60MPaResolution:0.5% F.SOutput signal: 4~20mAInstallation: ThreadPower supply:24VDC (9 ~ 36V)
-
SUP-PX300 Pressure transmitter with display
Pressure transmitter is a common sensor in industrial. Widely used in automatic control program like Water resources and hydropower, railway, building automation, aerospace, military project, petrochemical, electronic, marine etc. Pressure transmitter is used to measure the gas, steam’s level , density, and press. Then transform it into 4-20mA DC signal connecting to PC, control instrument etc. Features Range:-0.1~ 0 ~ 60MPaResolution:0.5% F.SOutput signal: 4~20mA; 1~5V; 0~10V; 0~5V; RS485Installation: ThreadPower supply:24VDC (9 ~ 36V)
-
SUP-P300 Pressure transmitter with compact size for universal use
SUP-P300 is a piezoresistive pressure sensor with compact design and stainless steel body SS304 and SS316L diaphragm , can work in the non-causticity environment, with 4-20mA signal output. P300 series is widely applied in pressure measurement for aviation, aerospace, automobile, medical treatment equipment, HVAC etc. Features Range:-0.1…0…60MPaResolution:0.5% F.S; 0.3%F.S optionalOutput signal: 4…20mA; 1…5V; 0…10V; 0…5V; RS485Installation: ThreadPower supply:24VDC (9 ~ 36V)
-
SUP-P260-M2 Slurry level sensor submersible level transmitter
SUP-P260-M2 Slurry level meter are completely sealed for submersion in liquid, can be used to measure water level, well depth, groundwater leverl and so on, common accuracy is 0.5%FS,with voltage or 4-20mA output signalsused. Durable 316 SS construction for reliable, long life in harsh environments. Features Range:0 ~ 100mResolution:0.5% F.SOutput signal: 4~20mAPower supply:24VDCTel.: +86 15867127446 (WhatApp)Email : vip@sinomeasure.com
-
SUP-RD701 Guided wave radar level meter
SUP-RD701 Guided wave radar for level measurement in liquids and bulk solids. In level measurement with guided wave radar, microwave pulses are conducted along a cable or rod probe and reflected by the product surface. Features
- Range:0~30 m
- Accuracy: ±10mm
- Application: Liquids and bulk solids
- Frequency Range: 500MHz ~ 1.8GHz
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-RD702 Guided wave radar level meter
SUP-RD702 Guided wave radar for level measurement in liquids and bulk solids. In level measurement with guided wave radar, microwave pulses are conducted along a cable or rod probe and reflected by the product surface. PTFE antenna, suitable for corrosive medium measurement.
Features
- Range: 0~20 m
- Accuracy: ±10mm
- Application: Acid, alkali, other corrosive media
- Frequency Range: 500MHz ~ 1.8GHz
-
SUP-DO7011 Membrane dissolved oxygen sensor
SUP-DO7011 Membrane type dissolved oxygen sensor is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. Features Range: DO：0-20 mg/L、0-20 ppm；Temperature：0-45℃Resolution:DO:±3% of the measured value；Temperature：±0.5℃Output signal: 4~20mATemperatureType:NTC 10k/PT1000
-
SUP-TDS7001 Conductivity sensor
SUP-TDS-7001 a variety of functions in one: conductivity EC / TDS measurement capabilities to achieve two in one, cost-effective integrated design to support the boiler water, RO water treatment, sewage treatment, pharmaceutical industry and other liquid measurement and monitoring. Features Range:0.01 electrode: 0.01~20us/cm
0.1 electrode: 0.1~200us/cmResolution:±1%FSThread:G3/4Pressure: 5 bar -
SUP-TDS7002 4 Electrodes Conductivity Sensor for EC and TDS Measuring
The SUP-TDS-7002 4 Electrodes Conductivity Sensor is a cost-effective, dual-function meter that measures conductivity (EC) and Total Dissolved Solids (TDS), ideal for industries like boiler water management, reverse osmosis (RO) treatment, sewage processing, and pharmaceuticals. This all-in-one device delivers precise, real-time data to ensure water quality and process efficiency.
Features:
- Range:10us/cm~500ms/cm
- Resolution:±1%FS
- Temp compensation:NTC10K (PT1000, PT100, NTC2.252K optional)
- Temperature range: 0-50℃
- Temperature accuracy:±3℃
-
SUP-TDS6012 Conductivity sensor
SUP-TDS-6012 A variety of functions in one: conductivity EC / TDS measurement capabilities to achieve two in one, cost-effective integrated design to support the boiler water, RO water treatment, sewage treatment, pharmaceutical industry and other liquid measurement and monitoring. Features Range:0.01 electrode: 0.02～20.00us/cm
0.1 electrode: 0.2～200.0us/cm
1.0 electrode: 2～2000us/cm
10.0 electrode: 0.02～20ms/cm -
SUP-PH8001 Digital pH sensor
SUP-PH8001 pH electrode can be used for aquaculture, IoT water quality detection, with digital interface (RS485*1), can be used to measure the change of pH/ORP value in the aqueous solution system within the range, and it has standard RS485 Modbus RTU protocol interface function, Can communicate with the host computer remotely Features
- Zero potential point:7 ± 0.5 pH
- Output:RS485
- Installation size: 3/4NPT
- Communication:RS485
- Power supply:12VDC
-
SUP-PH5011 pH sensor
SUP-PH5011 pH sensor increasing the silver ion at the reference sensor part, to enhance the stability and accuracy, suitable for general industrial waste water and discharge solutions.
- Zero potential point: 7±0.25
- Conversion coefficient:≥95%
- Membrane resistance: ＜500Ω
- Practical response time:< 1 min
- Measurement range: 0–14 pH
- Temperature compensation: Pt100/Pt1000/NTC10K
- Temperature: 0~60℃
- Reference: Ag/AgCl
- Pressure resistance: 4 bar at 25 ℃
- Thread Connection: 3/4NPT
- Material: PPS/PC
-
SUP-PH5013A PTFE pH sensor for corrosive medium
SUP-pH-5013A pH sensor used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 95%
- Installation size: 3/4NPT
- Pressure: 1 ~ 4 Bar at 25 ℃
- Temperature: 0 ~ 60℃ for general cables
-
SUP-ORP6050 ORP sensor
SUP-ORP-6050 pH sensor used in ORP measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Range:-2000~+2000 mV
- Installation size: 3/4NPT
- Pressure:6 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
-
SUP-PH5011 pH sensor
SUP-PH5011 pH sensor used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero potential point:7 ± 0.5 pH
- Slope:> 95%
- Installation size: 3/4NPT
- Pressure:4 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
-
SUP-PH5022 Germany glass pH sensor
SUP-5022 tecLine electrodes are high-quality sensors for professional applications in process and industrial measurement technology. These electrodes are known for their use of top-quality materials and components. They are designed as combined electrodes (the glass or metal electrode and the reference electrode are combined in one shaft). A temperature probe can also be integrated as an option, depending on the type. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 96%
- Installation size: Pg13.5
- Pressure: 1 ~ 6 Bar at 25 ℃
- Temperature: 0 ~ 130℃ for general cables
-
SUP-PTU8011 Turbidity Sensor
SUP-PTU-8011 turbidity meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of turbidity. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of turbidity value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple. Features Range: 0.01-100NTU、0.01－4000NTUResolution:Less than ± 2% of the measured valuePressure range: ≤0.4MPaEnvironment temp: 0~45℃
-
SUP-PH5018 Glass pH sensor
SUP-PH5018 glass pH sensor is widely used in wastewater treatment and fields including mining and smelting, papermaking, paper pulp, textiles, petrochemical industry, process of semiconductor electronic industry and downstream engineering of biotechnology. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 98%
- Installation size: Pg13.5
- Pressure: 0 ~ 4 Bar at 25 ℃
- Temperature: 0 ~ 100℃ for general cables
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PH5050 high temperature pH sensor
SUP-pH-5050 high temperature glass electrode used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero point: 7 ± 0.5 pH
- Installation thread: 3/4NPT
- Working pressure: 1 ~ 3 Bar at 25 ℃
- Temp: 0 to 60℃ for general cables
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PH5019 Plastic pH sensor
SUP-PH5019 plastic pH sensor is widely used in wastewater treatment and fields including mining and smelting, papermaking, paper pulp, textiles, petrochemical industry, process of semiconductor electronic industry and downstream engineering of biotechnology. Features
- Zero potential point:7 ± 0.5 pH
- Slope: > 98%
- Installation size: 3/4NPT
- Pressure: 1 ~ 3 Bar at 25 ℃
- Temperature: 0 ~ 60℃ for general cables
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-DO700 Optical dissolved oxygen meter
SUP-DO700 dissolved Oxygen meter adopts fluorescence method to measure dissolved oxygen.The cap of the sensor is coated with a luminescent material. Blue light from an LED illuminates the luminescent chemical. The luminescent chemical instantly becomes excited and releases red light. The time and intensity of red light are inversely proportional to the concentration of oxygen molecules, So the concentration of oxygen molecules is calculated. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60Hz
-
SUP-DO7016 Optical dissolved oxygen sensor
SUP-DO7016 Optical Dissolved Oxygen Sensor is based on luminescent optical technology. The Optical Dissolved Oxygen sensor is approved by the ASTM International Method D888-05 Features Range: 0.00 to 20.00 mg/LResolution:0.01Response time: 90% of the value in less than 60 secondsSignal interface: Modbus RS-485 (standard) and SDI-12 (option)Power supply:5 ~ 12 volts
-
SUP-ORP6040 ORP sensor
SUP-ORP-6040 pH sensor used in ORP measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Range:-1000~+1000 mV
- Installation size: 3/4NPT
- Pressure:4 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
