-
SUP-PH6.3 pH ORP meter
SUP-PH6.3 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance:≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output:4-20mA,RS485, Modbus-RTU,Relay
-
SUP-PH6.0 pH ORP meter
SUP-PH6.0 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output: 4-20mA,RS485, Modbus-RTU,Relay
-
SUP-PH8.0 pH ORP meter
SUP-PH8.0 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output: 4-20mA,RS485, Modbus-RTU,Relay
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
SUP-PH160S pH ORP meter
SUP-PH160S industrial pH meter is an online pH analyzer with 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance:≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output:4-20mA,RS485, Modbus-RTU,Relay
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
pH installation accessories
pH installation box, ph installation bracket and ph signal amplifier for pH sensor and controller installation. Features
-
Standard pH calibration solutions
Sinomeasure standard pH calibration solutions have an accuracy of +/- 0.01 pH at 25°C (77°F). Sinomeasure can provide the most popular and commonly used buffers (4.00, 7.00, 10.00 and 4.00, 6.86, 9.18) and which are dyed different colors so they can be easily identified when you are busy working. Features Accuracy: +/- 0.01 pH at 25°C (77°F)Solution value: 4.00, 7.00, 10.00 and 4.00, 6.86, 9.18Volume: 50ml * 3
-
SUP-PH8001 Digital pH sensor
SUP-PH8001 pH electrode can be used for aquaculture, IoT water quality detection, with digital interface (RS485*1), can be used to measure the change of pH/ORP value in the aqueous solution system within the range, and it has standard RS485 Modbus RTU protocol interface function, Can communicate with the host computer remotely Features
- Zero potential point:7 ± 0.5 pH
- Output:RS485
- Installation size: 3/4NPT
- Communication:RS485
- Power supply:12VDC
-
SUP-PH5011 pH sensor
SUP-PH5011 pH sensor increasing the silver ion at the reference sensor part, to enhance the stability and accuracy, suitable for general industrial waste water and discharge solutions.
- Zero potential point: 7±0.25
- Conversion coefficient:≥95%
- Membrane resistance: ＜500Ω
- Practical response time:< 1 min
- Measurement range: 0–14 pH
- Temperature compensation: Pt100/Pt1000/NTC10K
- Temperature: 0~60℃
- Reference: Ag/AgCl
- Pressure resistance: 4 bar at 25 ℃
- Thread Connection: 3/4NPT
- Material: PPS/PC
-
SUP-PH5013A PTFE pH sensor for corrosive medium
SUP-pH-5013A pH sensor used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 95%
- Installation size: 3/4NPT
- Pressure: 1 ~ 4 Bar at 25 ℃
- Temperature: 0 ~ 60℃ for general cables
-
SUP-ORP6050 ORP sensor
SUP-ORP-6050 pH sensor used in ORP measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Range:-2000~+2000 mV
- Installation size: 3/4NPT
- Pressure:6 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
-
SUP-PH5011 pH sensor
SUP-PH5011 pH sensor used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero potential point:7 ± 0.5 pH
- Slope:> 95%
- Installation size: 3/4NPT
- Pressure:4 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
-
SUP-PH5022 Germany glass pH sensor
SUP-5022 tecLine electrodes are high-quality sensors for professional applications in process and industrial measurement technology. These electrodes are known for their use of top-quality materials and components. They are designed as combined electrodes (the glass or metal electrode and the reference electrode are combined in one shaft). A temperature probe can also be integrated as an option, depending on the type. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 96%
- Installation size: Pg13.5
- Pressure: 1 ~ 6 Bar at 25 ℃
- Temperature: 0 ~ 130℃ for general cables
